|
 |
|
|
| |
METALPAK Animation
 "The
contaminated turnings are loaded into the bottom-ripping hopper,
where the twin augers reduce the turnings into an optimum size
and then gravity feed them into the charge scale.
The charge scale measures the turnings and a pre-programmed
amount is fed into the compaction channel.
 The
EKO patented dual densifying method compacts the metal turnings
while allowing the coolant to migrate to the recycling system.
The first stage compresses the turnings at 6,000 lbs. per square
inch, extracting the majority of the contaminating oil.
 The
second stage, utilizing over 40,000 p.s.i. pressure then extracts
the remaining oil while shaping the turnings into the dry patented
EKO bullet, which is ideal feed stock for a smelter.
The curved shape of the EKO bullet allows for greater migration
of the coolant resulting in a dryer end product and also improves
gravity handling of the "bullets".
 The
entire process occurs inside a completely closed system, eliminating
any adverse environmental impact and providing complete safety
factors to the operation."
|
|
| |
|
|
|
